ISSN 1551-4897
Vol. 13, Issue 3, 2016July 01, 2016 EDT
High-Permittivity and Low-Loss Electromagnetic Composites Based on Co-fired Ba0.55Sr0.45TiO3 or MgCaTiO2 Microfillers for Additive Manufacturing and Their Application to 3-D Printed K-Band Antennas
High-Permittivity and Low-Loss Electromagnetic Composites Based on Co-fired Ba0.55Sr0.45TiO3 or MgCaTiO2 Microfillers for Additive Manufacturing and Their Application to 3-D Printed K-Band Antennas
Articles in Vol. 13, Issue 3, 2016
Vol. 13, Issue 3, 2016
- Additive Manufacturing Design and Fabrication of Ceramic Cylindrical Ion Trap Mass Analyzer Chips for Miniaturized Mass Spectrometer Smart-Device (Internet of Things) ApplicationsPatrick RomanXudong ChenW. Kinzy JonesA. KarbasiC. Mike NewtonTravis BatesJacob DenkinsShekhar Bhansali
- High-Permittivity and Low-Loss Electromagnetic Composites Based on Co-fired Ba0.55Sr0.45TiO3 or MgCaTiO2 Microfillers for Additive Manufacturing and Their Application to 3-D Printed K-Band AntennasJuan CastroEduardo RojasThomas WellerJing Wang
- Design and Demonstration of Fine-Pitch and High-Speed Redistribution Layers for Panel-Based Glass Interposers at 40-μm Bump PitchBrett SawyerYuya SuzukiZihan WuHao LuVenky SundaramKadappan PanayappanRao Tummala
- Round-Robin of High-Frequency Test Methods by IPC-D24C Task GroupGlenn OliverJonathan WeldonChudy NwachukwuJohn AndresakisJohn CoonrodDavid L. WynantsDon DeGroot
- Thermodynamic Analysis of Physical Vapor Deposited Inorganic Thin Films on Low Temperature Cofired CeramicCarol PutmanRachel Cramm HornJ. Ambrose WolfDaniel Krueger
- Impact of Metallurgical and Mechanical Properties of Sintered Silver Joints on Die-Attach Reliability of High-Temperature Power ModulesHiroaki TatsumiSho KumadaAtsushi FukudaHiroshi YamaguchiYoshihiro Kashiba
- Thick Film Process Characterization for Thin Film Metallized LTCCM. A. GirardiK. A. PetersonP. T. Vianco
Castro, Juan, Eduardo Rojas, Thomas Weller, and Jing Wang. 2016. “High-Permittivity and Low-Loss Electromagnetic Composites Based on Co-Fired Ba0.55Sr0.45TiO3 or MgCaTiO2 Microfillers for Additive Manufacturing and Their Application to 3-D Printed K-Band Antennas.” Journal of Microelectronics and Electronic Packaging 13 (3): 102–12. https://doi.org/10.4071/imaps.509.